Nemo Dagger Ultralight Backpacking Tents Set up
0 comments
The Nemo Dagger Ultralight Backpacking Tent is a great choice for those looking for a lightweight and easy to set up tent. To set up the tent, first find a level area and lay out the body of the inner tent on the ground. Stake loosely if there is any wind. Build the pole set by connecting all segments and ensure all sections are seated properly. Place the long arch pole aside for now. Arrange the hubbed pole set so the green cross pole points toward the doors. Attach the inner tent canopy to the poles using the pole clips. Snap the ridge pole tips into the Ball Cap™ end fittings on the sides of the tent, above each door. Next, cover the inner tent with the rain fly keeping the vestibules lined up with the doors. Secure poles to rain fly with the internal velcro pole wraps. Locate the webbing on the corners of the fly and clip to the outermost bar on each corresponding Jake’s Foot™ with color matched webbing. Lift to snap it into a fully seated position.
Once the tent is set up, moderately adjust the tension in the fly using the webbing straps and ladder lock buckles, leaving room for final adjustments once the Porch™ vestibule is set up. Locate the pole sleeve above the rain fly’s large door and insert the assembled arch pole. Insert locking pole tips into grommets at the base of the pole sleeve. Position your tent as desired, preferably with the smaller vestibule facing toward the prevailing wind direction and stake the four inner tent corner anchors. Secure anchors by placing anchor loop around a stake, pulling moderately, and pound it into the ground with a hard object.
For final tensioning, stake the vestibules and pull firmly on all adjustable corner anchor webbing and vestibule tensioning lines. Add guylines for additional strength, as a properly tensioned tent ensures maximum water shedding and wind resistance. The Nemo Dagger Ultralight Backpacking Tent is a great choice for those looking for a lightweight and easy to set up tent.
Comments